If you have loopback cable on the same router, or vlan between two different routers, you could potentially run a IGP routing protocol for example ospf on the same network while using different context/process on each end to exchange routes.
Schilling On Mon, Mar 2, 2009 at 8:08 PM, Leonardo Gama Souza < leonardo.so...@nec.com.br> wrote: > Hi list, > > I am almost confident this is not possible, but would like to confirm > whether exporting routes from some VRF to the global routing table is > possible or not. > This would be a solution to overcome the constraints of using PBR+GRE > setup. > > Thanks in advance. > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/