Hi, I am also looking for a way to a complete mutual redistribution between 2 vrfs. For political reasons I am not allowed to put all the interfaces on the redistributing router in the same vrf.
Is there some way to do it? If I mutually import/export the route-targets between both vrfs, would that do the trick? If yes, would I need anything else to make that work? Thanks in advance Nasir Shaikh This email contains information from BT Nederland N.V., which may be privileged or confidential. It's meant only for the individual(s) or entity named above. If you are not the intended recipient, note that disclosing, copying, distributing or using this information is prohibited. If you have received this email in error, please let me know immediately on the email address above. We monitor our systems, and may record your emails. BT Nederland N.V. Registered office: Offices Minerva and Mercurius, Herikerbergweg 2, 1101 CM Amsterdam Registered at the Amsterdam Chamber of Commerce no: 33296214 -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Leonardo Gama Souza Sent: 03 March 2009 14:12 To: Gustavo Rodrigues Ramos Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] Export routes from VRF to the global routing table Hi Gustavo, Thanks for the feedback, but I would like to dynamically export the routes, not using static routing. Regards. ________________________________ From: Gustavo Rodrigues Ramos [mailto:gust...@nexthop.com.br] Sent: Mon 3/2/2009 22:30 To: Leonardo Gama Souza Cc: cisco-nsp Subject: Re: [c-nsp] Export routes from VRF to the global routing table Hello Leonardo, I guess you'll use route leaking to accomplish what you want. http://www.cisco.com/en/US/tech/tk436/tk832/technologies_configuration_e xample09186a0080231a3e.shtml Gustavo. On Mon, Mar 2, 2009 at 10:08 PM, Leonardo Gama Souza <leonardo.so...@nec.com.br> wrote: > Hi list, > > I am almost confident this is not possible, but would like to confirm > whether exporting routes from some VRF to the global routing table is > possible or not. > This would be a solution to overcome the constraints of using PBR+GRE > setup. > > Thanks in advance. > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/