Hi, On Mon, Mar 23, 2009 at 01:55:19PM -0500, Justin Shore wrote: > That G1 is truly bored, averaging below 10% utilization. I know that > IOS will bitch about it on boot but it will still continue to work won't > it? Any other side effects (other than TAC not liking it if they see it > until I demonstrate with the graphs that it's not a problem)?
IOS will bitch, but unless this has changed recently, all interfaces will
"just work". Of course you're on your own - if you complain to TAC about
"high CPU" and "packet losses", they are very likely to tell you "your
own fault".
OTOH, if the PA-A3s are *so* lightly loaded, I'd just go for it.
(I'm not sure I remember that right. I think on the NPE-G1, the I/O
board is on a separate PCI bus, and could be replaced with a PA holder
card, which has its own set of bandwith points. But maybe I misremember
part of this - you might want to check this in the docs).
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgpECmaeG8rmU.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
