Hi,
I am experementing per port limitation at 500mps on a Cisco 2960G 24 TCL. Uplink 1gbps port 24. When my bandwith goes over 500mps on 1 port (24), all my video streams thru port 24 goes down from 900kps to 200kps ! And i see a lot of DROPS in the port 24 statistics. Also i see that i still can read video at 900kps from port 1 to 8, while 24 is "overloaded" at 500mps. So the switch bandwith is ok, but the port 24 looks like too busy. Note that i changed the cisco switch for a Dlink gigabit switch, and had the same problem ! I do streaming video, and i read that microburst could be a problem. This thread was open, but never been solved : http://www.gossamer-threads.com/lists/cisco/nsp/96188 What does Cisco recommends for this problem ? Can't a 2960G handle >500mps ? _________________________________________________________________ Inédit ! Des Emoticônes Déjantées! Installez les dans votre Messenger ! http://www.ilovemessenger.fr/Emoticones/EmoticonesDejantees.aspx _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
