On Mon, Mar 30, 2009 at 11:51:43AM +0300, Dmitry Kiselev wrote: > Hello! > > Could anybody explain me how exactly IOS choise which module to > disable if system run in combined power mode and one of power inputs > failed? > > > http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/pwr_envr.html#wp1020384 > > However, if one power supply fails and there is not enough power > for all of the previously powered-up modules, the system powers > down those modules. > > > > Could I do some pre-configuration to point IOS to modules "less > critical" for me?
As per this letter, http://puck.nether.net/pipermail/cisco-nsp/2006-March/028767.html you can achieve this placing less critical modules in highest numbered slots and more critical - to lowest. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
