Yes you can use the WS-670x in the 7600 with an RSP, I have a couple of chassis with this at the moment, given they are the 6704(one with DFC) 10GE's but I can't see a 6708 not working either... 7600#sh mod Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SERIAL 2 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SERIAL 3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SERIAL 5 2 Route Switch Processor 720 (Active) RSP720-3CXL-GE SERIAL
On Wed, Apr 1, 2009 at 2:54 AM, Geoffrey Pendery <ge...@pendery.net> wrote: > The stuff we've been reading (look at "Supervisor Engines Supported" > on the data sheets for "Cisco Catalyst 6500 Series 10 Gigabit Ethernet > Interface Modules", or browse the line cards for the 7600, or go into > Configurator tool) claims that the RSP 720 won't support the X6704 or > X6708 10 Gig "LAN" cards, only the SIP/SPA/ES "WAN" type cards. > > I don't mean to kick off a big "6500 vs 7600" storm again, but does > anyone know if this is incorrect? > Can we buy a new 7609-S chassis, put a new RSP 720 in it, put 7600 IOS > on that Sup, then plug in a WS-X6708-10G-3C and have it work? > > > -Geoff > > > On Mon, Mar 30, 2009 at 4:41 AM, Mark Tech <techcon...@yahoo.com> wrote: > > > > Hi > > I have a prospect for a 10G upstream customer and Upstream ISP > connections. I would need to connect these into our 7609s running RSP > 720-3CXL's, at the moment I have found that the WS-X6704-10GE card may be > suitable. > > > > My technical requirements are: > > 10Gbps line rate > > IPv4 > > Able to handle full Internet routing table > > Potentially IPv6 and MPLS in the future > > > > With the WS-X6704-10GE, there seems to be several options that are > available with it i.e. > > > > Memory Option: > > MEM-XCEF720-256M > > Catalyst 6500 256MB DDR, xCEF720 (67xx interface, DFC3A) > > MEM-XCEF720-512M > > Cat 6500 512MB DDR, xCEF720 (67xx interface, DFC3A/DFC3B) > > MEM-XCEF720-1GB > > Catalyst 6500 1GB DDR, xCEF720 (67xx interface, DFC3BXL) > > > > ==================================================== > > Distributed Forwarding Card Option > > > > WS-F6700-CFC > > Catalyst 6500 Central Fwd Card for WS-X67xx modules > > WS-F6700-DFC3B > > Catalyst 6500 Dist Fwd Card, 256K Routes for WS-X67xx > > WS-F6700-DFC3A > > Catalyst 6500 Dist Fwd Card for WS-X67xx modules > > WS-F6700-DFC3BXL > > Catalyst 6500 Dist Fwd Card- 3BXL, for WS-X67xx > > WS-F6700-DFC3C > > Catalyst 6500 Dist Fwd Card for WS-X67xx modules > > WS-F6700-DFC3CXL > > Catalyst 6500 Dist Fwd Card- 3CXL, for WS-X67xx > > > > I assume that I would need MEM-XCEF720-1GB and WS-F6700-DFC3CXL? > > > > Regards > > > > Mark > > > > > > > > > > _______________________________________________ > > cisco-nsp mailing list cisco-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/