Thanks Pelle for the link. >From that link, I took a look at "Configuring MQC Support for IP Sessions" but the IOS I am using c7301-a3jk91s-mz.122-31.SB13.bin doesn't support the command to apply the service policy to.
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_mqc_ipse ssion_ps6922_TSD_Products_Configuration_Guide_Chapter.html Router(config-pmap-c)# policy-map type service PREMIUM_SERVICE Router(config-service-policymap)# service-policy input PREMIUM_MARK_IN <-- not supported Router(config-service-policymap)# service-policy output PREMIUM_UB_OUT <-- not supported Might just take the simple route and configure separate class-maps and policy-maps for each customer. At present we only have a handful customers that we need to rate limit. Cheers. Andy This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the organisation. Finally, the recipient should check this email and any attachments for the presence of viruses. The organisation accepts no liability for any damage caused by any virus transmitted by this email. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
