You are using this port for UPLINK, and it could be a trunk port. I strongly suggest you should not use portfast on this port. This way you can avoid loops and 30 second wait will be worth it.
Regards, Masood Blog: http://weblogs.com.pk/jahil/ > Hi, > > When I plug wire into c3750g port, it would wait about "30sec" then > change to uplink status. > > Are there any method can cut down uplink time? > > > Regards, > Pigsign > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
