We've seen some pretty serious issues with all NF export on ASR1Ks
stopping on config changes (merely taking off bgp-nexthop triggers it)
until a reboot.
We're also a little disappointed at the lack of support for IPv6 flow
export support and proper Flexible Netflow support.
SRD, SB and XNC all seem to have completely different levels of feature
implementation for Netflow, which makes keeping things consistent pretty
difficult. Is Flexible Netflow/IPv6 support coming soon?
adam.
Is it supported in any mgmt port at very high speed?.. ;).. ASR1000 main
focus was to deal with the high speed netflow and fw logging needs so
that's why enabling nf exporting from this mgmt port hasn't been a very
high priority item. We can take this offline and work with you and your
account team so we can reprioritize accordingly, but this is definitely
not supported.
HTH
[email protected] (Jared Mauch) wrote:
These are all things you should raise with erbu directly. We have
been
having the same config delays. This is apparently a known issue.
Actually, like ten minutes ago I found something deep in the CsC that
said exporting netflow data over the Mgt Interface was an unsupported
config option...
My thought, and I quote: "WTF?"
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
