I've got an off-topic plea. I'm trying to configure a simple little
871W as a CE that I need to deploy next week. The wifi on this thing is
kicking my ass. 881Ws are completely different than their 871W
ancestors. 881Ws have a logically separate internal AP that you
basically session into. The 871W's radio is integrated into the
router's config itself. I can't for the life of me get wifi sub-ints to
bridge onto the SVIs that I'm using on the wired side (3x VLANs: data,
voice, and guest).
I found a config guide online that showed SVIs configured with nothing
but the bridge-group commands, BVIs corresponding to those bridge-groups
where all the L3 config now resides, and then normal Dot11Radio sub-ints
with matching bridge-groups. However doing this and putting the
bridge-group commands on the SVIs breaks the wired connectivity (and
doesn't make wifi work anyway).
Does anyone have a working config for a 871W that they wouldn't mind
sharing off-list? This should be a trivially minor config and for some
reason it's thoroughly stumping me.
Thanks
Justin
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
