Thanks Arie. But ES cards are not supported on Cat6500, no? And also VPLS over MPLS on a SIP in Cat6500 - is it supported? If so do you know which SIP?Thanks, Marlon
On Wed, Jun 3, 2009 at 9:19 PM, Arie Vayner (avayner) <[email protected]>wrote: > Marlon, > > If you have DFCs on the regular LAN cards, then EoMPLS and L3VPN will be > done in hardware and in distributed forwarding mode. > For VPLS, you need to have either an ES20/ES40 card or a SIP card facing > the core. Having this card means that again VPLS is done in hardware - > some functionality is done on the regular DFCs and some on the egress > core facing module. > > Arie > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Marlon Duksa > Sent: Thursday, June 04, 2009 02:07 > To: [email protected] > Subject: [c-nsp] MPLS/IP-VPN capable cards on Cat 6500 > > Hi -Does anyone know which cards on Cat6500 support MPLS > and separately IP-VPN, posibly at 40Gbps throughput? I'm looking for a > distributed (DFC) forwarding solution? > > I know that Cat6500 is very limited in VPLS support, but IP-VPN and > EoMPLS > should be no problem, right? > > Thanks, > Marlon > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
