For everyone interested, bug was CSCsy92252.
Many thanks to Arie and Andrew (@Cisco) for pointing that out.
--
Tassos
Tassos Chatzithomaoglou wrote on 04/06/2009 09:20:
Has anyone managed to do a rommon upgrade to a RSP720 and immediately
afterwards had it boot as a standby ? I did it twice and i always got
the "Data TLB Error Exception" message
rommon 7 > boot bootdisk:c7600rsp72043-advipservicesk9-mz.122-33.SRB5a.bin
Initializing ATA monitor library...
*** Data TLB Error Exception ***
PC = 0x40442e4, Vector = 0x1400, SP = 0x4012dc4
I have RMAed 2 RSP720s until now after doing exactly the same procedure
and now i'm waiting for the 3rd one!
If the RSP720 is the only one in the chassis (so it's acting like an
active), then booting after the rommon upgrade works fine! If the RSP720
gets booted as a standby after the rommon upgrade, then it gets
destroyed and cannot be used neither as an active nor as a standby.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
