I would suggest SRD1 IOS, however be prepared to upgrade the firmware if you have any SPA boards.
On Thu, Jun 4, 2009 at 2:09 PM, Tassos Chatzithomaoglou <[email protected]>wrote: > For everyone interested, bug was CSCsy92252. > Many thanks to Arie and Andrew (@Cisco) for pointing that out. > > -- > Tassos > > Tassos Chatzithomaoglou wrote on 04/06/2009 09:20: > >> Has anyone managed to do a rommon upgrade to a RSP720 and immediately >> afterwards had it boot as a standby ? I did it twice and i always got the >> "Data TLB Error Exception" message >> >> rommon 7 > boot bootdisk:c7600rsp72043-advipservicesk9-mz.122-33.SRB5a.bin >> >> Initializing ATA monitor library... >> >> *** Data TLB Error Exception *** >> PC = 0x40442e4, Vector = 0x1400, SP = 0x4012dc4 >> >> >> I have RMAed 2 RSP720s until now after doing exactly the same procedure >> and now i'm waiting for the 3rd one! >> >> If the RSP720 is the only one in the chassis (so it's acting like an >> active), then booting after the rommon upgrade works fine! If the RSP720 >> gets booted as a standby after the rommon upgrade, then it gets destroyed >> and cannot be used neither as an active nor as a standby. >> >> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- James _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
