Hi All Im playing around with EoMPLS on 6500`s w/SUP720-3b and 6700 line cards... No ES hardware.
Everything seems fine, performance is good, scales ok for what we need, what I`m failing to do is get link state propagation or remote port shutdown to work. Anybody have any pointers on this.. Our config is very basic port mode xconnects.. interface GigabitEthernet1/12 mtu 1560 no ip address xconnect 192.168.1.1 2007 pw-class TEST#1 I notice that in conf mode under the xconnect config you can enter "remote link failure notification" this seems to be enabled by default, but doesnt seem to do anything.. I imagine that I need to configure some OAM or CFM or similar, but am at a loss as to how, anyone thats already done it? Any help gratefully accepted _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
