I wanted to propose the EEM solution :) How about Tclsh with "typeahead" command?
http://wiki.nil.com/Insert_responses_to_command_prompts_in_Tclsh Ivan http://www.ioshints.info/about http://blog.ioshints.info/ > -----Original Message----- > From: David Freedman [mailto:[email protected]] > Sent: Wednesday, June 24, 2009 2:26 PM > To: [email protected] > Subject: [c-nsp] Reload without confirmation > > Am trying to reload a low end IOS device (c800 in this case) > without displaying a confirmation prompt. > > My issue is that the platform needing to issue the command > can not "see" > the VTY output so could not be expected to respond to a > confirmation prompt, looked in vain for some kind of > "/noconfirm" flag but didn't find one... > > Does not appear to be possible with SNMP (even though it > accepts the snmp-server shutdown command). > > My current solution is to use an EEM applet called manually > with a single action of "reload" , unfortunately this only > applies to 800 images with EEM (I would guess ADV images only) > > Anybody come up with a better solution? > > TIA > > Dave. > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
