yes, I have tried with v2, the 800 series simply does *not* support remote SNMP reloads despite having the command in place, I can happily perform this on an 7200 just not an 800 series, tried 12.4(15)T and 12.4(20)T ADVIPSERVICES.
$ snmpset -v2c -c private 10.0.0.2 1.3.6.1.4.1.9.2.9.9.0 i 2 Error in packet. Reason: noCreation (That table does not support row creation or that object can not ever be created) Failed object: SNMPv2-SMI::enterprises.9.2.9.9.0 Router#sh run | in snmp snmp-server community private RW snmp-server system-shutdown ------------------------------------------------ David Freedman Group Network Engineering Claranet Limited http://www.clara.net -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wed 6/24/2009 19:06 To: David Freedman Cc: Brian Turnbow; Cisco-nsp; Jared Mauch Subject: Re: [c-nsp] Reload without confirmation Hi, > $ snmpset -v2c -c private 10.0.0.2 1.3.6.1.4.1.9.2.9.9.0 i 2 > Error in packet. > Reason: noCreation (That table does not support row creation or that > object can not ever be created) > Failed object: SNMPv2-SMI::enterprises.9.2.9.9.0 hmmm, wonder if you've got some SNMP ACLs or community problem? thats the correct command and MIB (having had to do remote reloads a few times using SNMP) alan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
