Rodney Dunn wrote:
The PA-GE has issues at higher speeds.
You should move to L2TPV3 and see if it's better in regards
to performance. Your best would be pure L3 forwarding.
If the PA-GE is the issue you will have to get off that PA.
What happens if you move it to one of the onboard GigE ports on the NPE-400?
There aren't any onboard gigE ports on an NPE-400. You need NPE-G1 for
those.
--
Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net
Impulse Internet Service - http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
