I couldn't remember so I looked for a picture and thought I saw one it did have.
They would need the G1/G2 then. Or maybe go to routed mode. Rodney On Wed, Jul 01, 2009 at 10:53:28AM -0700, Jay Hennigan wrote: > Rodney Dunn wrote: > >The PA-GE has issues at higher speeds. > > > >You should move to L2TPV3 and see if it's better in regards > >to performance. Your best would be pure L3 forwarding. > > > >If the PA-GE is the issue you will have to get off that PA. > > > >What happens if you move it to one of the onboard GigE ports on the > >NPE-400? > > There aren't any onboard gigE ports on an NPE-400. You need NPE-G1 for > those. > > -- > Jay Hennigan - CCIE #7880 - Network Engineering - [email protected] > Impulse Internet Service - http://www.impulse.net/ > Your local telephone and internet company - 805 884-6323 - WB6RDV > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
