Could you please expand on or give me a link to information I can find about the 6500/7600 issues you mentioned? Thanks!
-- Randy www.FastServ.com ---------- Original Message ----------- From: Mark Tinka <[email protected]> To: [email protected] Cc: "Randy McAnally" <[email protected]>, "Rens" <[email protected]> Sent: Thu, 16 Jul 2009 20:29:30 +0800 Subject: Re: [c-nsp] edge router BGP > On Thursday 16 July 2009 08:06:16 pm Randy McAnally wrote: > > > Having similar requirements, we just upgraded to a 6500 > > series with SUP720-3bxl. All you will need to do is > > choose the line cards. Fits the bill perfectly. > > Not sure if that's too large (and depending on future > requirements, whether the whole 6500/7600 drama will come > back to bite the OP). > > I was thinking more, ASR1000 series. Will do wire rate, has > a large enough control plane to handle multiple full tables > to customers, is the natural progression from the 7200-VXR > platform, e.t.c. > > side note: we have pushed an NPE-G2 as an edge router, i.e., > ACL's, uRPF, BGP, IS-IS, BFD, all that good stuff, to > about 950Mbps with a couple of BGP feeds to customers; > granted, CPU hovered about 90%, but no packet loss, > e.t.c. > > I'm, in no way, recommending you do this (we tend to > do things a little differently sometimes), but thought > you might like this horror story :-). > > Cheers, > > Mark. ------- End of Original Message ------- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
