I recently installed these sups and the 6748. I'm noticing that the active sup lists the IOS I'm booting up from the CF card and the in-active sup lists the IOS on sup-bootflash. The 6748 lists the newer IOS as well.
1. Is this a problem? 2. If #1 = yes, then how must one fix the problem? Thank you Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 SAL 2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL 3 8 8 port 1000mb GBIC Enhanced QoS WS-X6408A-GBIC SAD 4 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC SAL 5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAL 6 2 Supervisor Engine 720 (Cold) WS-SUP720-3BXL SAL Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 0004.2861.2750 to 0004.2861.277f 2.2 5.4(2) 8.7(0.22)BUB Ok 2 0025.840c.9310 to 0025.840c.933f 3.0 12.2(18r)S1 12.2(33)SXH5 Ok 3 0002.fc25.0984 to 0002.fc25.098b 1.3 5.4(2) 8.7(0.22)BUB Ok 4 0008.a4f6.1784 to 0008.a4f6.1793 2.2 5.4(2) 8.7(0.22)BUB Ok 5 001f.6c77.13b0 to 001f.6c77.13b3 5.8 8.5(3) 12.2(33)SXH5 Ok 6 001f.6c77.13c8 to 001f.6c77.13cb 5.8 8.5(3) 12.2(18)SXF1 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 2 Centralized Forwarding Card WS-F6700-CFC SAL 4.1 Ok 5 Policy Feature Card 3 WS-F6K-PFC3BXL SAL 1.10 Ok 5 MSFC3 Daughterboard WS-SUP720 SAL 3.3 Ok 6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL 1.10 Ok 6 MSFC3 Daughterboard WS-SUP720 SAL 3.3 Ok Mod Online Diag Status ---- ------------------- 1 Pass 2 Pass 3 Pass 4 Pass 5 Pass 6 Pass -b -- Bill Blackford Senior Network Engineer Northwest Regional ESD my /home away from home _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
