Yes, it's a problem. do a "show run | include boot system" to see what the boot string says.
also do a 'show boot' and 'show redundancy'. I bet you are missing the image on the redundant sup. Do a "dir disk0:" and a "dir slavedisk0:" or "disk1" depending on the boot string ---- Matthew Huff | One Manhattanville Rd OTA Management LLC | Purchase, NY 10577 http://www.ox.com | Phone: 914-460-4039 aim: matthewbhuff | Fax: 914-460-4139 > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Bill Blackford > Sent: Friday, July 17, 2009 11:18 AM > To: cisco-nsp mailing list > Subject: [c-nsp] Software versioning on SUP720s > > I recently installed these sups and the 6748. I'm noticing that the > active sup lists the IOS I'm booting up from the CF card and the in- > active sup lists the IOS on sup-bootflash. The 6748 lists the newer IOS > as well. > > 1. Is this a problem? > 2. If #1 = yes, then how must one fix the problem? > > Thank you > > > Mod Ports Card Type Model > Serial No. > --- ----- -------------------------------------- ------------------ --- > -------- > 1 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 SAL > 2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL > 3 8 8 port 1000mb GBIC Enhanced QoS WS-X6408A-GBIC SAD > 4 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC SAL > 5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAL > 6 2 Supervisor Engine 720 (Cold) WS-SUP720-3BXL SAL > > Mod MAC addresses Hw Fw Sw > Status > --- ---------------------------------- ------ ------------ ------------ > ------- > 1 0004.2861.2750 to 0004.2861.277f 2.2 5.4(2) 8.7(0.22)BUB > Ok > 2 0025.840c.9310 to 0025.840c.933f 3.0 12.2(18r)S1 12.2(33)SXH5 > Ok > 3 0002.fc25.0984 to 0002.fc25.098b 1.3 5.4(2) 8.7(0.22)BUB > Ok > 4 0008.a4f6.1784 to 0008.a4f6.1793 2.2 5.4(2) 8.7(0.22)BUB > Ok > 5 001f.6c77.13b0 to 001f.6c77.13b3 5.8 8.5(3) 12.2(33)SXH5 > Ok > 6 001f.6c77.13c8 to 001f.6c77.13cb 5.8 8.5(3) 12.2(18)SXF1 > Ok > > Mod Sub-Module Model Serial Hw > Status > ---- --------------------------- ------------------ ----------- ------- > ------- > 2 Centralized Forwarding Card WS-F6700-CFC SAL 4.1 > Ok > 5 Policy Feature Card 3 WS-F6K-PFC3BXL SAL 1.10 > Ok > 5 MSFC3 Daughterboard WS-SUP720 SAL 3.3 > Ok > 6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL 1.10 > Ok > 6 MSFC3 Daughterboard WS-SUP720 SAL 3.3 > Ok > > Mod Online Diag Status > ---- ------------------- > 1 Pass > 2 Pass > 3 Pass > 4 Pass > 5 Pass > 6 Pass > > > > -b > > -- > Bill Blackford > Senior Network Engineer > Northwest Regional ESD > > my /home away from home > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
