Hi,
We are trying to upgrade IOS on a Cisco 7206VXR (NPE-G1) processor
(revision B) with 983040K/65536K bytes of memory.
Currently running Version 12.3(13a), RELEASE SOFTWARE (fc2) but we need
L2TPv3 functionality to configure a xconnects using a pw-class statement.
We tried running Version 12.2(33)SRC4, RELEASE SOFTWARE (fc2) but the
router was unstable.
Our peering sessions would come up and die after about a minute, the
logs had lots of these entries:
%BGP_SESSION-5-ADJCHANGE: neighbor X.X.X.X IPv4 Unicast topology base
removed from session BGP Notification sent
I noticed that the BGP sessions had high InQ and OutQ values of 300+
where they usually sit at 0 and router was generally not very responsive
on the command line.
Also our RADIUS athentication was not working for some reason.
Is this just incompatability or unstable code?
Can anyone recommend an image version for this hardware platform that
has this feature set and is known to be stable in your environment?
Thanks.
Andy.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
