On Friday 07 August 2009 12:20:46 am Andy Ashley wrote: > I noticed that the BGP sessions had high InQ and OutQ > values of 300+ where they usually sit at 0 and router was > generally not very responsive on the command line.
Sounds like an MTU issue between your BGP speakers. Can you verify the negotiated MSS over the BGP session and ensure all transit interfaces can actually support that value, at a minimum?: #sh ip bgp neighbors 1.2.3.4 | i Datagram Datagrams (max data segment is 1500 bytes): # Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
