2960's will not support stacking and yes, they do support clustering, but pretty much every low end switch supports that. To achieve this type of channeling, you would need 2970's or 3750's with stackwise and then I think you're limited to LACP and regular etherchannel only.
-ryan -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of luismi Sent: Tuesday, August 11, 2009 8:01 AM To: Brian Raaen Cc: [email protected] Subject: Re: [c-nsp] Etherchannel between 2x2960 and 1x7600 2960 doesn't support stack as far as I know. it could support cluster, I think. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
