On Tue, 11 Aug 2009, Gregory Boehnlein wrote:
I use "cu" - looks to be a lot like "tip"
http://www.computerhope.com/unix/ucu.htm
Per the E-mail, the issue is that I need things like HylaFax and other
commercial software that relies on direct access to the /dev/tty device to
access a modem on a remote Cisco box..
Minicom, CU, all of that is great, but I can't have Hylafax use Minicom to
communicate w/ a remote modem.
I need a driver that appears to be a serial port on the Linux box, that is
connected to a remote modem on the Cisco so that proprietary software can
communicate w/ the modem as if it were locally attached.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
What about socat ?
http://www.dest-unreach.org/socat/
Surely your distro has packages in $repo. You could have this start from
and rc script.
socat PTY,link=$HOME/dev/vmodem0,raw,echo=0,waitslave EXEC:'"ssh modemserver.us.org
socat - /dev/ttyS0,nonblock,raw,echo=0"'
Yours would be even simpler, as the right hand side would be (probably)
just a tcp-connect:
--
Brandon Applegate - CCIE 10273
PGP Key fingerprint:
7407 DC86 AA7B A57F 62D1 A715 3C63 66A1 181E 6996
"SH1-0151. This is the serial number, of our orbital gun."
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
