Absolutely, with EEM 3.0 an applet can be triggered with an SNMP trap or inform. The details are here (although the article describes a slightly different task):
http://wiki.nil.com/Trigger_EEM_applets_with_SNMP_Informs However, are you absolutely positive there is no other way to get what you need? In many cases you could use a smart routing design instead of the PBR. Ivan http://www.ioshints.info/about http://blog.ioshints.info/ > -----Original Message----- > From: Manaf Al Oqlah [mailto:[email protected]] > Sent: Thursday, August 13, 2009 4:31 PM > To: [email protected] > Subject: [c-nsp] Event Manager question > > > Hi all, > > Can I configure event manager to be started when it gets > notification from another router. for example, I want router1 > to be configured with policy based routing on a specific > interface once the bgp peer on router2 is down. I don't want > to permanently configure the PBR since it is consume very > high CPU utilizing on router1 > > Thank you, > Manaf > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
