"ip name-server VRF name address" specifies the DNS server to use for operations in the specified VRF (for example, when doing traceroute, telnet or ping on the PE-router within the VRF).
A bit more is written here: http://www.cisco.com/en/US/docs/ios/12_4t/ip_addr/configuration/guide/tvrfdn s.html Ivan http://www.ioshints.info/about http://blog.ioshints.info/ > -----Original Message----- > From: luismi [mailto:[email protected]] > Sent: Tuesday, August 25, 2009 3:03 PM > To: Phil Mayers > Cc: [email protected] > Subject: Re: [c-nsp] dns resolution not working with vrfs > > #ping vrf FW2INET www.google.es > > Translating "www.google.es"...domain server (199.45.32.40) [OK] > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 64.233.169.99, timeout is 2 seconds: > !!!!! > Success rate is 100 percent (5/5), round-trip min/avg/max = > 116/119/120 ms > > > quite interesting... > > Thanks for that point of view > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
