Forgot to note that with SXI they work. Its the version 1 and 2
that have the problem.
Jeff
On Aug 27, 2009, at 5:42 AM, Jeff Fitzwater wrote:
We have 24 port 100FX MM boards WS-X6324-100FX-MM in a 13 slot
chassis, and none of these modules come up all the way with SXI1 or 2.
In Version 1 the modules were not even recognized yet were a
supported device. In rev 2 they are recognized and indicate that
they pass the diags after reload, but the status of module stays in
OTHER and ports are non functional.
The fix was suppose to be in rev SXI 2.
Has anybody else seen this?
Jeff Fitzwater
OIT Network Systems
Princeton University
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
