I have run into the exact same problem here.
=======================================
Eric Gregory
Network and Telecommunications Services
University of Maryland
=======================================
Jeff Fitzwater wrote:
We have 24 port 100FX MM boards WS-X6324-100FX-MM in a 13 slot
chassis, and none of these modules come up all the way with SXI1 or 2.
In Version 1 the modules were not even recognized yet were a supported
device. In rev 2 they are recognized and indicate that they pass the
diags after reload, but the status of module stays in OTHER and ports
are non functional.
The fix was suppose to be in rev SXI 2.
Has anybody else seen this?
Jeff Fitzwater
OIT Network Systems
Princeton University
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
