Hi all, We are doing some tests here with the code provided by Tomas. We have several questions that we were not able to find a proper answer over internet that we would like to share with you to see if we can understand everything correctly:
a) "ip prefix-list" has a parameter called "le" so we can create the rule like this: ip prefix-list FTP_NET seq 1 permit 10.53.0.224/29 le 32 Why is the reason to use "le" parameter? we saw it in several examples over internet but we don't understand it yet. What is the impact if we don't use it? b) Is there any difference if we use a normal ACL instead a prefix-list in the route-map? we also saw several configurations using ACLs and it seems to do the same. Regards and thanks in advance. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
