On 2009-09-08, at 18:47, Michael K. Smith - Adhost wrote:
I don't think the bridge is really transparent due to the 'bridge 1 route ip' on your exchange-point side device. If possible, you might want to try removing that statement (if you're local to the device, of course) to see if that does it. I don't think there is a 'bridge 1 route ipv6'.
I did try removing that, and managing that bridge through the console, but I still couldn't pass IPv6 frames.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
