On 2009-09-09, at 04:13, Arie Vayner (avayner) wrote:
Did you check for MTU issues? IPv6 has different MTU requirements than IPv4, and the setup you are describing is prone to MTU issues due to the reduced MTU on the L2 transport.
That's an interesting idea, but in this case I've tested and the layer-2 transport is 1500-byte clean, which matches the interface MTUs everywhere.
Joe _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
