Scott, If you don't think you'll be using 8.x features anytime, I have a lot of luck with 7.2(4)33. Avoid the middle interim releases as there are a couple of nasty ISAKMP bugs. Getting to those downloads can be a bit of a challenge now, but this link still works, just go to the Interim Releases.
http://www.cisco.com/cgi-bin/tablebuild.pl/asa -ryan -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Scott Granados Sent: Thursday, September 24, 2009 4:51 PM To: [email protected] Subject: [c-nsp] ASA5520 which image should I use? Hi, I'm running a pair of ASA5520 devices as VPN concentrators. Presently there is a software image installed that seems very old and was actually shipped with the devices before I arrived on the scene. I'm experiencing some issues with bringing up L2L tunnels and figured that a firmware update was in order. What version are folks using successfully? I was thinking of going with the 8X code but not sure which one to choose. The features I'm using are very basic and include simple client access and LAN to LAN access, I'm not using the anyconnect or web VPN features at this point. Which image do you think would fit the bill the best? Any pointers would be appreciated. Thank you Scott _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
