Hi, thanks for the pointers.
I think I'm going to give 7.2.4-33 a shot and stay clear of the 8X.
Thank you
Scott
----- Original Message -----
From: "Antonio Soares" <[email protected]>
To: "'Scott Granados'" <[email protected]>; <[email protected]>
Sent: Thursday, September 24, 2009 4:23 PM
Subject: RE: [c-nsp] ASA5520 which image should I use?
Stay away from 8.2. We are experiencing crashes since July (TAC case
involved). Tomorrow we will install 8.2.1-10 to see if finally
we get rid of this.
Regards,
Antonio Soares, CCIE #18473 (R&S)
[email protected]
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Scott Granados
Sent: quinta-feira, 24 de Setembro de 2009 21:51
To: [email protected]
Subject: [c-nsp] ASA5520 which image should I use?
Hi, I'm running a pair of ASA5520 devices as VPN concentrators. Presently
there is a software image installed that seems very old
and was actually shipped with the devices before I arrived on the scene.
I'm experiencing some issues with bringing up L2L tunnels
and figured that a firmware update was in order. What version are folks
using successfully? I was thinking of going with the 8X
code but not sure which one to choose. The features I'm using are very
basic and include simple client access and LAN to LAN
access, I'm not using the anyconnect or web VPN features at this point.
Which image do you think would fit the bill the best? Any
pointers would be appreciated.
Thank you
Scott
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
