Hi Jack, you can't add eight 100Mbit-Interfaces additionally. The NPE-G1 has 3 build-in Gbit-Ports, the 7206VXR chassis is able to handle 6 additional Cards.
One 100MBit FE-Card (PA-FE-TX/FX) allocates 200 Bandwith Points, a 2-Port FE-Card (PA-2FE-TX/FX) allocates 400 BW-Points. So, you probably have to buy four PA-2FE-TX/FX-Cards (if you cannot use the build-in Gbit-Ports for your purposes *or* if you can use them buy 5 PA-FE-TX/FX-Cards :-) Bye, Werner jack daniels schrieb: > Hi , > > I'm a bit confused on - > "Also, don't assume that because you can add 8 100Mbit interfaces, that > you can use them at full speed.." > > Regards > > > > On Tue, Sep 29, 2009 at 6:03 PM, Howard Jones <[email protected]> wrote: > >> On 29/09/2009 13:03, Antonio Soares wrote: >>> Here's the document you need: >>> >>> Cisco 7200 Bandwidth Points >>> >>> >> http://www.cisco.com/en/US/products/hw/routers/ps341/prod_presentation_list.html >>> To add 8 FastEthernet Ports, you will need 4 * PA-2FE-TX. The NPE-G1 has >> 3 built-in GE interfaces. >> Also, don't assume that because you can add 8 100Mbit interfaces, that >> you can use them at full speed... >> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- transnet Internet Services GmbH Werner Detter - Netmaster Lilienstr. 3-5 81669 München http://www.trans.net [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
