Detter Werner wrote:
Hi Jack,
you can't add eight 100Mbit-Interfaces additionally. The NPE-G1 has 3 build-in
Gbit-Ports, the 7206VXR chassis is able to handle 6 additional Cards.
One 100MBit FE-Card (PA-FE-TX/FX) allocates 200 Bandwith Points, a 2-Port
FE-Card (PA-2FE-TX/FX) allocates 400 BW-Points.
So, you probably have to buy four PA-2FE-TX/FX-Cards (if you cannot use
the build-in Gbit-Ports for your purposes *or* if you can use them buy
5 PA-FE-TX/FX-Cards :-)
I would buy a switch with at least one Gbit port and eight FE ports and
trunk to VLANs.
--
Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net
Impulse Internet Service - http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
