Do I need a midway point one to use for the brief period I'm on 7.1 or just
update this once?
Thank you
Scott
----- Original Message -----
From: "Ryan West" <[email protected]>
To: "Scott Granados" <[email protected]>; <[email protected]>
Sent: Friday, October 02, 2009 1:43 PM
Subject: RE: [c-nsp] which version of asdm to use with the asa 5520??
Hey Scott,
Under the 7.2 line, I would use the latest interim release of the 5.2.4
ASDM. In this case it would be interim release 56 ->
http://www.cisco.com/cgi-bin/Software/Tablebuild/doftp.pl?ftpfile=cisco/crypto/3DES/ciscosecure/asa/interim/asdm-52456.bin&app=Tablebuild&status=showC2A
-ryan
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Scott Granados
Sent: Friday, October 02, 2009 4:32 PM
To: [email protected]
Subject: [c-nsp] which version of asdm to use with the asa 5520??
Hi all,
I'm in the process of updating a pair of ASA 5520S from 7.0.7 to 7.2.4-33.
I have the intermediate 7.1x release that I'll switch to in the middle but
not sure what to do with the asdm code. What version should I use? It
wasn't obvious to me on the Cisco site, how do I tell which version goes
with a specific firmware release? Any pointers would be appreciated.
Thank you
Scott
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
