I am currently running (C7200P-SPSERVICESK9-M), Version 12.4(4)XD10
Dominic
----- Original Message -----
From: "Byrd, William" <[email protected]>
To: "Dominic" <[email protected]>
Sent: Wednesday, October 07, 2009 3:26 PM
Subject: Re: [c-nsp] Unable To Use T3 Card (PA-MC-2T3-EC)
What IOS version are you using? There is a minimum supported IOS for this
card.
-Will
----- Original Message -----
From: "Dominic" <[email protected]>
Sent: Wed, October 7, 2009 14:21
Subject:[c-nsp] Unable To Use T3 Card (PA-MC-2T3-EC)
Hi Everyone:
I am trying to install a Cisco T3 Card, Model #: PA-MC-2T3-EC, on a Cisco
7206VXR with NPE-G2. When I insert the card, I get the alarm below.
Oct 7 18:11:45.100: %ENTITY_ALARM-6-INFO: CLEAR CRITICAL PA Slot 2 Active
Card Removed OIR Alarm
Oct 7 18:11:50.220: %PA-3-REVNOTSUPPORTED: PA in slot2 (Ethernet)
requires
base h/w revision of (1.14) for this chassis
Oct 7 18:11:50.220: %PA-3-DEACTIVATED: port adapter in bay [2] powered
off.
The google info suggests this might be an earlier version of the card,
which
is why I tried a recently manufactured replacement, but with the same
result. Does anyone know what's going on, or how to fix this?
Thank you in advance.
Dominic
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
----- End of original message -----
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
