Hi, On Wed, Oct 07, 2009 at 02:21:15PM -0400, Dominic wrote: > I am trying to install a Cisco T3 Card, Model #: PA-MC-2T3-EC, on a Cisco > 7206VXR with NPE-G2. When I insert the card, I get the alarm below. > > Oct 7 18:11:45.100: %ENTITY_ALARM-6-INFO: CLEAR CRITICAL PA Slot 2 Active > Card Removed OIR Alarm > Oct 7 18:11:50.220: %PA-3-REVNOTSUPPORTED: PA in slot2 (Ethernet) requires > base h/w revision of (1.14) for this chassis > Oct 7 18:11:50.220: %PA-3-DEACTIVATED: port adapter in bay [2] powered off.
This is a bit surprising. So far, I have seen this message only when
an older PA is inserted into a VXR chassis, which has certain minimum
hardware requirements (as opposed to the non-VXR chassis).
OTOH...
On Wed, Oct 07, 2009 at 03:37:40PM -0400, Dominic wrote:
> I am currently running (C7200P-SPSERVICESK9-M), Version 12.4(4)XD10
... it might be that this software just doesn't know about this specific
PA (which is very new, and anything based on 12.4(4) is a few years old
now regarding hardware support).
"C7200P" smells like NPE-G2, so you don't have that many options - I'm
no NPE-G2 expert, but I think all you *can* use is "12.4T" or "12.2SR" -
so I'd pick a recent one of either IOS versions and try that. Or go for
15.0(1)M, which might or might not be less bugged than 12.4(max)T.
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgprANJP0Jfol.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
