Answer from Cisco TAC: I verified the bug you mentioned, it is fixed in 12.2(33)SRD1, so it should not have caused the failure with upgrade from SRD2 to SRD3. I found another bug that can bring the device to RPR mode during ISSU, bug id is CSCsm98000, this bug is also fixed in 12.2(33)SRD, so it should have caused the failure with upgrade from SRD2 to SRD3.
> Hello, > > I want upgrade IOS on the cisco 7600 with two Sup32 without rebooting. I use > for this ISSU procedure. > I try migrate from SRC to SRD branch. IOS is upgraded, but downtime duration > is about 280 seconds. All sessions(ospf, mpls, bgp) with neighbors was lost. > NSF and GR(for mpls,ospf,bgp) are turned on. > In ISSU process I saw that c7600 has switched from SSO to RPR mode. All > interface cards have been reloaded. I thought that the problem in IOS, > because I use different branches of IOS(SRC->SRD3). For the test, I tried to > switch from SRD2 to SRD3 - the result is the same. > I think the problem is in the switching mode(from SSO to RPR). > > How to upgrade IOS without downtime? -- Alexandr Gurbo _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
