AFAIK this command is for eBGP only, no? On Tue, Oct 13, 2009 at 10:07 PM, Matlock, Kenneth L <[email protected]>wrote:
> Router bgp <AS> > Neighbor <AS> ttl-security hops <hops> > > ? > > Ken Matlock > Network Analyst > Exempla Healthcare > (303) 467-4671 > [email protected] > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Manu Chao > Sent: Tuesday, October 13, 2009 4:52 AM > To: [email protected] > Subject: [c-nsp] ibgp TTL > > For a very specific design, i need to limit TTL value in ibgp-multihop. > > Is it possible to limit iBGP TTL like we do with ebgp-multihop ttl > command? > > Any input appreciated. > > Manu > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
