yes, only supported for ebgp. Would be interested about the "very
specific design" and why Manu requires this functionality?
oli
> AFAIK this command is for eBGP only, no?
>
> On Tue, Oct 13, 2009 at 10:07 PM, Matlock, Kenneth L
> <[email protected]>wrote:
>
> > Router bgp <AS>
> > Neighbor <AS> ttl-security hops <hops>
> >
> > ?
> >
> > Ken Matlock
> > Network Analyst
> > Exempla Healthcare
> > (303) 467-4671
> > [email protected]
> >
> >
> >
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]] On Behalf Of Manu Chao
> > Sent: Tuesday, October 13, 2009 4:52 AM
> > To: [email protected]
> > Subject: [c-nsp] ibgp TTL
> >
> > For a very specific design, i need to limit TTL value in
ibgp-multihop.
> >
> > Is it possible to limit iBGP TTL like we do with ebgp-multihop ttl
> > command?
> >
> > Any input appreciated.
> >
> > Manu
> > _______________________________________________
> > cisco-nsp mailing list [email protected]
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
