Hello Oliver, Any possibilities of 12.0(32)SY6 being affected too ?
12k2>sh ver | inc IOS IOS (tm) GS Software (C12KPRP-P-M), Version 12.0(32)SY6, RELEASE SOFTWARE (fc2) 12k2> Because the Bug you mentioned is exactly what i have: 12k2>sh diag (...) PEM 1 (AC_PWR_1): Failsafe PS [Failsafe-PEM=] PEM 2 (AC_PWR_2): No PEM present PEM 3 (AC_PWR_3): No PEM present 12k2> Thanks. Regards, Antonio Soares, CCIE #18473 (R&S) [email protected] -----Original Message----- From: Oliver Boehmer (oboehmer) [mailto:[email protected]] Sent: quarta-feira, 14 de Outubro de 2009 15:23 To: Antonio Soares; [email protected] Subject: RE: [c-nsp] Cisco 12416 Power Management > > I'm trying to figure out why i have this output: > > ++++++++++++++++++++++++++++++++++++++++++++++ > 12k2>sh env power_supply > > Failsafe power system > > Slot # 48V AMP_48 > (Volt) (Amp) > 27 PEM1 53 10 Failsafe-PEM= Failsafe PS this looks like CSCsk88926 (PEMS appear in Failsafe Mode during IOS image upgrade or power cycle), duplicate of CSCsj91286 fixed in 12.0(32)SY5 and 12.0(32)S9. Which release do you run? Only 12.0(32)SY3 and 12.0(32)S6 should be affected.. oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
