Thanks a lot Kevin, one more doubt pls, then what is the purpose of Flash in Flexman?
Rgds/ Sony On Thu, Oct 15, 2009 at 9:48 AM, Kevin Graham < [email protected]> wrote: > > > > > > My doubt are 1. whether these cwan1/0-disk0: and cwan1/1-disk0: are > builtin > > flash modules on Flexwan module? > > Yes. > > > 2. if so can i upload my IOS in those modules > > No. FlexWAN (as with all linecards) boots after the MSFC/Sup. Its devices > are inaccessible from either Sup or MSFC ROMMON. > > > becoz, my current flash size will not support my new IOS > > Presumably this is is a Sup2/MSFC2? If so, just use a CompactFlash card in > a PCMCIA adapter (which will be presented as 'disk0'. I haven't tested > how large of cards are accepted (on any of the sup's), however 512mb's > haven't caused any problems in this setup for us. > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
