> My doubt are 1. whether these cwan1/0-disk0: and cwan1/1-disk0: are builtin > flash modules on Flexwan module?
Yes. > 2. if so can i upload my IOS in those modules No. FlexWAN (as with all linecards) boots after the MSFC/Sup. Its devices are inaccessible from either Sup or MSFC ROMMON. > becoz, my current flash size will not support my new IOS Presumably this is is a Sup2/MSFC2? If so, just use a CompactFlash card in a PCMCIA adapter (which will be presented as 'disk0'. I haven't tested how large of cards are accepted (on any of the sup's), however 512mb's haven't caused any problems in this setup for us. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/