Hi Graham, Of course YMMV, however I just replaced a 2691XM that was doing DMVPN duties running EIGRP (~350 routes). The unit was equiped with a cypto card and max throughput was around 10Mbps.
At peak traffic times the CPU would hit 65/70% and this is without running QoS. So, from my perspective the 2621XM doesn't have enough juice to do what you want it to do. Hope this helps, -mtw -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Graham Wooden Sent: Monday, October 19, 2009 3:25 PM To: cisco-nsp Subject: [c-nsp] 2600XM usability? Hi all, I have a new network connecting to me that I will be shoving down some routes to them via a 5Mb metro-ethernet. They have a 2621XM. It will be doing BGP, with maybe a route table of 86K routes (mine plus their other provider, which I think is being delivered by a 2xT1 mlppp). I think it's the 128D/32F model. Not sure of the IOS as of yet. Does anyone have any real-world usability with this platform? Will this box hold up to 8Mb of traffic, with QoS/ACL and BGP with this number of routes? Thanks, -graham _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/