Hi Is flow-control enabled on the other end? Seems like you are connecting to a device that doesn't support flow-control.
regards On Mon, 2009-11-09 at 11:22 +0200, Mohammad Khalil wrote: > hey all > > i have Cisco 7606 connected to WiMAX ASN GW via port channel > now i have the following issue > router#sh int po10 | inc overrun > 0 input errors, 0 CRC, 0 frame, 8032 overrun, 0 ignored > router#sh int po10 | inc ove > router#sh int po20 | inc overrun > 0 input errors, 0 CRC, 0 frame, 4305576 overrun, 0 ignored > > router#sh run int po10 > Building configuration... > > Current configuration : 216 bytes > ! > interface Port-channel10 > description CORE_VLAN to ASN Gateway > switchport > switchport access vlan 10 > switchport trunk encapsulation dot1q > switchport mode access > flowcontrol receive on > flowcontrol send on > end > > router#sh run int po20 > Building configuration... > > Current configuration : 215 bytes > ! > interface Port-channel20 > description RAS-VLAN to ASN Gateway > switchport > switchport access vlan 20 > switchport trunk encapsulation dot1q > switchport mode access > flowcontrol receive on > flowcontrol send on > end > > router#sh int port-channel 10 etherchannel > Age of the Port-channel = 284d:17h:52m:00s > Logical slot/port = 14/1 Number of ports = 5 > GC = 0x00000000 HotStandBy port = null > Port state = Port-channel Ag-Inuse > Protocol = - > > Ports in the Port-channel: > > Index Load Port EC state No of bits > ------+------+------+------------------+----------- > 0 21 Gi3/3 On 2 > 1 42 Gi3/11 On 2 > 2 84 Gi3/19 On 2 > 3 08 Gi3/27 On 1 > 4 10 Gi3/35 On 1 > > Time since last port bundled: 154d:01h:08m:46s Gi3/35 > Time since last port Un-bundled: 154d:01h:08m:50s Gi3/35 > > > router#sh int port-channel 20 etherchannel > Age of the Port-channel = 284d:17h:52m:09s > Logical slot/port = 14/2 Number of ports = 5 > GC = 0x00000000 HotStandBy port = null > Port state = Port-channel Ag-Inuse > Protocol = - > > Ports in the Port-channel: > > Index Load Port EC state No of bits > ------+------+------+------------------+----------- > 0 21 Gi3/4 On 2 > 1 42 Gi3/12 On 2 > 2 84 Gi3/20 On 2 > 3 08 Gi3/28 On 1 > 4 10 Gi3/36 On 1 > > Time since last port bundled: 154d:00h:55m:38s Gi3/36 > Time since last port Un-bundled: 154d:00h:55m:41s Gi3/36 > > example of the interfaces: > > > CR1.KJ-Building#sh run int g3/36 > Building configuration... > > Current configuration : 284 bytes > ! > interface GigabitEthernet3/36 > description RAS_VLAN (porrtchannel 20) > switchport > switchport access vlan 20 > switchport mode access > no logging event link-status > load-interval 30 > speed 1000 > duplex full > flowcontrol receive on > flowcontrol send on > channel-group 20 mode on > end > > CR1.KJ-Building#sh run int g3/35 > Building configuration... > > Current configuration : 300 bytes > ! > interface GigabitEthernet3/35 > description CORE_VLAN to ASN Gateway (porrtchannel 10) > switchport > switchport access vlan 10 > switchport mode access > no logging event link-status > load-interval 30 > speed 1000 > duplex full > flowcontrol receive on > flowcontrol send on > channel-group 10 mode on > end > > and on the other router > > router#sh int po10 | inc overrun > 0 input errors, 0 CRC, 0 frame, 1643 overrun, 0 ignored > router#sh int po20 | inc overrun > 0 input errors, 0 CRC, 0 frame, 591813 overrun, 0 ignored > > > anyone can help ?? > > > > > _________________________________________________________________ > Windows Live Hotmail: Your friends can get your Facebook updates, right from > HotmailĀ®. > http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_4:092009 > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
