i work in a university which has three campuses. on each campuse, there is one
cisco 6509 switch as a core switch. all other switches (L2) are in vtp client
except the core switches. the campuses are connected with a routed link. so,
one campuse, has 10.128.0.0/16 subnet and the others have a subnet of
10.129.0.0/16 and 10.130.0.0/16. rip v2 is used on the intercampuse links to
advertise individaul vlans.
here is my problem.
i'm asked to create a vlan with a subnet id of 192.168.1.0/24. but computers in
this vlan are located in the 10.128.0.0/16 campuse and 10.130.0.0/16
campuse.the link between the 10.128.0.0/16 and 10.130.0.0/16 is not trunk it is
routed with ip address.
so can any body suggest me how to implement such senario which allows one vlan
(in this case 192.168.1.0/24) to be visible from the two campuses? i.e to
propage that specific valn across a routed link not a trunk link.
thanks
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
