Pete,
This is a software issue. The address - 0x1E - is invalid.
Eninja
On Nov 30, 2009, at 9:11 PM, Pete Barnwell <[email protected]> wrote:
I've had a 2821 reload unexpectedly -sh ver shows a bus error as below
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version
12.4(22)T1, RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Thu 26-Feb-09 19:47 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
uptime is 1 hour, 7 minutes
System returned to ROM by bus error at PC 0x4224F26C, address 0x1E at
18:56:16 GMT Mon Nov 30 2009
System restarted at 18:43:38 GMT Mon Nov 30 2009
#sh region address 0x4224F26C
Address 0x4224F26C is located physically in :
Name : text
Class : IText
Media : R/O
Start : 0x4000F000
End : 0x43F7FFFF
Size : 0x03F71000
This suggests to me hardware rather than software from Googling?
The routers got its original 256Mb and an additional 512Mb stick in
it
- is it possible to tell if this is a memory error from this, and if
so
which stick might be the problem?
I have no Smartnet on this, so can't ask TAC :(
Thanks
Pete
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
