With that command, I only log commands used in configure mode (or that's why I got as a result, using the same config as you typed below), I also would like to log command used in enable mode.
Any idea ? Le lundi 07 décembre 2009 à 10:31 +0000, Mackinnon, Ian a écrit : > Archive commands? > http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtconlog. > html > > > SUMMARY STEPS > > 1. enable > > 2. configure terminal > > 3. archive > > 4. log config > > 5. logging enable > > 6. logging size entries > > 7. hidekeys > > 8. notify syslog > > 9. end > > Needs an IOS that supports it. > > Ian > > > -----Original Message----- > > From: [email protected] [mailto:cisco-nsp- > > [email protected]] On Behalf Of Henry-Nicolas Tourneur > > Sent: 07 December 2009 09:44 > > To: [email protected] > > Subject: [c-nsp] Cisco logging commands > > > > Hi, > > > > We are currently changing our servers and we are going to get rid of > > our > > old Tacacs+ server. The new AAA server is based on Radius > > (freeradius/debian). > > > > The problem is that IOS can't log commands (enable and configure) into > > Radius. > > I found that functionality to work around that problem : > > > http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/rele > > ase/12.2_46_se/configuration/guide/swlog.html > > > > But the problem is that it's only logging configure commands to > syslog, > > not enable, that's not enough for me. > > > > So the question is : any idea about how to get IOS to log enable > > commands into syslog ? or how to use Radius accounting for commands ? > > What are the possibilities without Tacacs+ ? > > > > TIA. > > > > -- > > Henry-Nicolas Tourneur > > > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________________ > > Atos Origin and Atos Consulting are trading names used by the Atos Origin > group. The following trading entities are registered in England and Wales: > Atos Origin IT Services UK Limited (registered number 01245534) and Atos > Consulting Limited (registered number 04312380). The registered office for > each is at 4 Triton Square, Regents Place, London, NW1 3HG.The VAT No. for > each is: GB232327983 > > This e-mail and the documents attached are confidential and intended solely > for the addressee, and may contain confidential or privileged information. > If you receive this e-mail in error, you are not authorised to copy, > disclose, use or retain it. Please notify the sender immediately and delete > this email from your systems. As emails may be intercepted, amended or > lost, they are not secure. Atos Origin therefore can accept no liability for > any errors or their content. Although Atos Origin endeavours to maintain a > virus-free network, we do not warrant that this transmission is virus-free > and can accept no liability for any damages resulting from any virus > transmitted. The risks are deemed to be accepted by everyone who > communicates with Atos Origin by email. > _______________________________________________________ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
